CloudLink

Input Power

• The CloudBox can run off either AC or DC. Move the AC/DC switch before connecting wires.
• Position 1 requires power for the board to operate.
• Input Power requires 100-240VAC 50/60 Hz or 8-14VDC
• AC: Load, Neutral, Ground
• DC: Positive, Negative

Output Power

• Output Power to a pump, solenoid, or dispenser is connected to the bottom left terminal labeled PUMP.
• AC: Load, Neutral, Ground
• DC: Positive, Negative

Pulse Input

• PWR = 12VDC
• ENC FILL = Pulse wire
• GND = Pulse wire

RS-485

• RS-485 connection used between the CloudBox and CloudLink.