Installer Resource Guide

This page contains links to commonly used resources for installers and service technician partners.

Installer App

The FuelCloud Installer App helps guide your installations.

Download on iOS | Download on Android

Interested in trying the new Installer App?

FuelCloud Hardware

CloudBox

The CloudBox can connect to most existing fueling equipment. It can be installed as a standalone unit or paired with an iPad or Small Business Pedestal. It's UL and FCC rated to guarantee industry-standard safety and long-term reliability.

• CloudBox Installation Manuals
• Hardware Identification

CloudLink

Need to support more pumps? You can daisy chain up to nine CloudLinks to a single CloudBox, increasing the total number of pump relays available. A CloudLink always requires a CloudBox to function.

• CloudLink Installation Manual

Authorization Devices

iPad and Small Business Pedestal

An iPad or Small Business Pedestal creates a dedicated spot for drivers to authenticate at the pump.

• Small Business Pedestal Installation Manual
• Extreme Weather Tablet Enclosure Instructions
• Extreme Weather Kiosk Retrofit
• Thermostat Retrofit Guide

Personal Mobile Devices

Personal- or business-issued phones/tablets running the FuelCloud Driver App can be used to wirelessly authenticate at the pump.

Third-party Hardware

Pulsers

FuelCloud can support a variety of 2-, 3-, and 4-wire pulsers, dispensers, meters, and registers.

• Pulser troubleshooting
• Pulser compatibility guide
• Pulser wiring best practices

Tank monitors

FuelCloud supports tank monitors from several leading manufacturers.

• Anova Unify Tank Monitor Configuration
• Anova XFluid Tank Monitor Configuration
• Centeron Tank Monitor Configuration
• Morrison Bros. Tank Monitor Configuration
• Otodata Tank Monitor Integration
• SMARTank Tank Monitor Configuration
• Xtellio Tank Monitor Configuration

Network Configurations

Drivers use the FuelCloud mobile app to wirelessly authenticate before fueling. CloudBoxes can be configured to support many different wireless and wired network setups!

Access point

By default, a CloudBox will emit a Wi-Fi network signal. If a CloudBox’s signal strength isn’t powerful enough, an external Access Point can be installed.

• Access Point Installation Manual

iPad Direct Connect

Hardwire an iPad to the CloudBox using an ethernet adapter. Depending on the iPad model, this can be set up over USB-C or Lightning (a PoE injector is required if USB-C isn’t available).

• iPad Ethernet Direct Connect (10th Gen)
• iPad Ethernet Direct Connect (9th Gen)
• iPad PoE Ethernet Direct Connect (5th–9th Gen)
• Vehicle to iPad USB-C Direct Connect Installation Guide
• DC Vehicle to iPad Direct Connect Installation Guide

Infrastructure mode

Connect a CloudBox to a local Wi-Fi network. Drivers can only authenticate over the local Wi-Fi network (the CloudBox will not emit its own Wi-Fi).

• Infrastructure mode setup

Ethernet Client Mode

Connect a CloudBox to a local ethernet network. Drivers can authenticate over local Wi-Fi or CloudBox Wi-Fi.

• Ethernet Client Mode

Installer App Early Access

The new FuelCloud Installer app streamlines the install experience! It is purpose-built for installers to simplify setup and includes tools to register hardware, configure relays, and run tests.

Email nic@fuelcloud.com or text (503) 820-8154 to request early access to the new Installer app!

• The New FuelCloud Installer App